Apollo RoadRunner MR2B Series, Руководство по эксплуатации

Страница: 52 / 84

User’s Manual
42
Actions 1
Figure 70 ─ Motion Detection Actions 1 screen
The DVR can be set to react to motion detection differently for each camera.
NOTE: You can associate multiple cameras with a camera that detects motion.
y
No. : Indicates a camera number.
y
Record : Choose cameras as many as you wish to be associated with the camera. When the DVR
detects motion on the camera, it starts recording video from all the associated cameras.
y
Alarm-Out: Choose alarm-outs as many as you wish to be associated with the camera. When the DVR
detects motion on the camera, it triggers output signals on the associated Alarm-Out connectors.
NOTE: For the Record action, the camera you select should be set to the Event or Time & Event
recording mode in the Record Schedule setup screen.
NOTE: For the Alarm-Out action, the alarm output you select should be set to the Event mode in
the Alarm-Out setup screen (Schedule tab).
NOTE: An internal buzzer sounds in the DCP when the alarm output is activated.
y
Notify : Select to notify when the DVR detects motion on the camera, and the Motion Detection Notify
menu appears. You can select the entire options in the list by selecting Notification , or you can select
individual items by selecting that item.
NOTE: For the Notify action, the notify item you select should be enabled in the Notification setup
screen and the DVR should be registered in the RAS (Remote Administration System).