Apollo RoadRunner MR2B Series, Руководство по эксплуатации

Страница: 80 / 84

User’s Manual
70
Appendix F ─ Connector Pin Outs
I/O Connector Pin Outs
1 to 8 Alarm Inputs 1 to 8
G Chassis Ground (6 connectors)
NC Relay Alarm Outputs (Normally Closed)
C Relay Common
NO Relay Alarm Outputs (Normally Open)
ARI Alarm Reset In
PANIC Panic Recording
12V VDC Outputs
G Chassis Ground (9 connectors)
RS485 Connector Pin Outs
Master Unit Slave Unit
RX+/TX+ → To → TX+/RX+
RX-/TX- → To → TX-/RX-
Appendix G ─ Troubleshooting
Problem Possible Solution
No Power Check power connections.
No Live Video
y Check camera video cable and connections.
y Check monitor video cable and connections.
y Confirm that the camera has power.
y Check camera lens settings.
DVR has stopped recording
If hard disk drive is full, you will either need to delete video or set
the DVR to the Overwrite Mode.
The icon displays, however,
the DVR is not recording.
When the DVR is in the Pre-Event recording mode, the yellow
and display when there is no event, and the DVR is not
recording. The red and display when any event occurs and
the DVR starts recording.