Apollo RoadRunner MR2B Series, Руководство по эксплуатации

Страница: 49 / 84

Mobile Digital Video Recorder
39
Actions 1
Figure 61 ─ Alarm-In Actions 1 screen
You can set the actions the DVR will take whenever it senses an input on one of its alarm input
connectors.
y
No. : Indicates an alarm-in device number.
y
Record
: Choose cameras as many as you wish to be associated with the alarm-in device. When the
DVR detects an input, it starts recording video from all the associated cameras.
y
Alarm-Out: Choose alarm-outs as many as you wish to be associated with the alarm-in device. When
the DVR detects an input, it triggers output signals on the associated Alarm-Out connectors.
NOTE: For the Record action, the camera you select should be set to the Event or Time & Event
recording mode in the Record Schedule setup screen.
NOTE: For the Alarm-Out action, the alarm output you select should be set to the Event mode in
the Alarm-Out setup screen (Schedule tab).
NOTE: An internal buzzer sounds in the DCP when the alarm output is activated.
y
Notify
: Select to notify when the DVR detects an input, and the Alarm-In Notify menu appears.
NOTE: For the Notify action, the notify item you select should be enabled in the Notification setup
screen and the DVR should be registered in the RAS (Remote Administration System).
Selecting Notification selects the entire options in the list. Selecting individual
items selects that item.
Figure 62 ─ Alarm-In Notify menu