Anritsu 3656B W1, Руководство пользователя, Страница: 15 / 278

3656B W1 Calibration/Verification Kit Overview 1-4 Model 3656B W1 (1 mm) Calibration/Verification Kit
3656B W1 Cal/Ver Kit & 2300-584-R PVS UG PN: 10410-00286 Rev. L 1-3
1-4 Model 3656B W1 (1 mm) Calibration/Verification Kit
The 3656B W1 (1 mm) Calibration/Verification Kit is shown in Figure 1-1 with the listed components. The
-3 option on this calibration kit will add .s1p files describing the calibration standards onto the USB memory
device. This is in addition to the polynomial models (.ccf file format) supplied with the base 3656B calibration
kit.
1. Male Broadband Termination – 28W50
2. Female Broadband Termination – 28WF50
3. Male Open – 24W50
4. Female Open (1.930 mm) – 24WF50
5. Male Offset Short 1 (2.02 mm) – 23W50-1
6. Female Offset Short 1 (2.02 mm) – 23WF50-1
7. Male Offset Short 2 (2.65 mm) – 23W50-2
8. Female Offset Short 2 (2.65 mm) – 23WF50-2
9. Male Offset Short 3 (3.180 mm) – 23W50-3
10. Female Offset Short 3 (3.180 mm) – 23WF50-3
11. Male-Male Adapter – 33WW50
12. Male-Female Adapter – 33WWF50
13. Female-Female Adapter – 33WFWF50
14. Fixed Male SC Connector – 33WSC50
15. Fixed Female SC Connector – 33WFSC50
16. Interchangeable Slider, SC Connectors
• 60939 (M)
• 60943 (F)
17. Locking Keys, SC Connectors – 61265
18. Pin Exchange Tool – 01-402
19. Two 3.5 inch floppy diskettes for use with the
Lightning 37000 Series VNAs containing:
• W1 Component Coefficient Data
• W1 Component Verification Data
• The 3.5 inch floppy disks are labeled with the Serial
Number of the Calibration/Verification Kit
20. Stepped Impedance Mismatch Thru Line Verification
Device inside plastic box – 18WWF50-1B
21. 50 Ohm Matched Thru Line Verification Device inside
plastic box – 18WWF50-1
22. 6–7 mm End Wrench – 01-505
23. 6 mm Torque Wrench – 01-504
24. USB Memory Device for VectorStar MS4640A/B
Series VNAs containing the following:
• W1 Component Coefficient Data for VectorStar
• W1 Component Verification Data for VectorStar
• 2300-584-R System Performance Verification
(PVS) Software
• 3656B W1 (1 mm) Calibration/Verification Kit and
System Performance Verification Software
User Guide – 10410-00286 (this document)
• The USB memory device is labeled with the Serial
Number of the Calibration/Verification Kit
Figure 1-1. 3656B W1 (1 mm) Calibration/Verification Kit Components
MODEL 3656B W1 CAL KIT
19
16
7
8
9
10
11
12
13
17 14 18
20
1
2
3
4
5
6
15
21
22
23
24