Enter 113 End
*/$%ENTR* *ZEND*
Setting up your Operation Modes
7
7-2-2.
Scanner Options
A selection of scanner options, from setting button functions to adjusting the buzzer
volume and vibrator, is offered to personalize the device to suit your usage habits.
7-2-2-1.
Set Scan Mode
Scan Mode refers to how the scanner reacts to the scanned barcode. By default, Scan
Mode is set to be
Momentary
. In this case, LED light will stay on as long as Scan button
is pressed down, and automatically turn off once Scan Button is released or a barcode is
scanned. However, with
Good Read Off
settings, LED will remain lit for a specified
period of time with a release of the pressed Scan Button, and afterwards dim only when
the barcode is successfully decoded or the timeout period expires. In
Continue
Scan
Mode, the device will continuously send out light till the cable is unplugged, after Scan
Button is pressed down and then released. Scan
Toogle
label if you intend to gain more
flexibility in when to read a barcode. A press on Scan Button will lead in switching on the
light whereas either a successful decoding of a barcode or giving it another press
correspondingly switches off the light. Please scan the appropriate label to determine your
preferred scan mode.
7-2-2-2.
Set Output Interface
Please scan the appropriate barcode to specify the output interface.
*B8080*
GoodReadOff
B8080
*B8081*
Momentary
B8081
*B81D1*
USBHid
B81D1
*B8082*
Continue
B8082
*B8083*
Toogle
B8083