Enter 327 End
*/$%ENTR* *ZEND*
Configuring Symbology
8
8-21-8.
Set Position for Inserting Custom Info
Ins0Pos
and
Ins1Pos
parameters allow you to specify the specific position within a barcode
to insert your own custom message as to better format barcode data. However, to have the
mentioned future take effect, the group of parameters in this section necessarily pairs up with
that in
Section 8-21-9
which further demonstrates how to define what contains in inserted
information. Please be advised that
Ins0Pos
has to work with
Ins0PosChar
and
Ins1Pos
with
Ins1PosChar
.
Procedure
(1)
Scan
Enter
barcode.
(2)
Scan
Ins0Pos
barcode to specify the position where you intend to add extra
message.
(3)
Please refer to ASCII Code Table and Decimal/Hexadecimal Table in the appendix
to scan decimal value barcodes representing the desired number in the range of 0 to
255. For instance, to insert the custom info at the first position of the barcode, scan
0
to assign the specified decimal value “0”.
(4)
Scan
SET
barcode to complete the variable-binding operation.
(5)
Scan
Ins1Pos
barcode first and then repeat Step (3)-(4) to complete the similar
configuration, if necessary.
(6)
Scan
End
barcode to complete the configuration.
8-21-9.
Set Message Content to Insert
Ins0PosChar
and
Ins1PosChar
parameters allow you to define your own custom message
used to organize scanned data in a better format. With reference to the parameter value which
you associate with the set of parameters in
Section 8-21-8
, the custom info will be
accordingly inserted in the specific position. That is,
Ins0Pos
refers to the position where
Ins0PosChar
will be inserted whereas
Ins1PosChar
will be added in the position of
Ins1Pos.
*F76E0*
Ins0Pos
F76E0
(Length: 1 digit / Range: 0-255)
*F77E0*
Ins1Pos
F77E0
(Length: 1 digit / Range: 0-255)
