Enter 204 End
*/$%ENTR* *ZEND*
Configuring Symbology
8
Procedure
(1)
Scan
Enter
barcode.
(2)
Scan
TrunEnd
barcode to specify the number of characters to delete backwards from
the end of the decoded data.
(3)
Please refer to Decimal/Hexadecimal Table in the appendix to scan decimal value
barcodes representing the desired number in the range of 0 to 255. For instance, to
remove the last two digits out of every UPC-A symbol, then scan
2
to assign the
specified decimal value “2”.
(4)
Scan
SET
barcode to complete the variable-binding operation.
(5)
Scan
End
barcode to complete the configuration.
8-2-8.
Set Position for Inserting Custom Info
Ins0Pos
and
Ins1Pos
parameters allow you to specify the specific position within a barcode
to insert your own custom message as to better format barcode data. However, to have the
mentioned future take effect, the group of parameters in this section necessarily pairs up with
that in
Section 8-2-9
which further demonstrates how to define what contains in inserted
information. Please be advised that
Ins0Pos
has to work with
Ins0PosChar
and
Ins1Pos
with
Ins1PosChar
.
Procedure
(1)
Scan
Enter
barcode.
(2)
Scan
Ins0Pos
barcode to specify the position where you intend to add extra
message.
(3)
Please refer to ASCII Code Table and Decimal/Hexadecimal Table in the appendix
to scan decimal value barcodes representing the desired number in the range of 0 to
255. For instance, to insert the custom info at the first position of the barcode, scan
0
to assign the specified decimal value “0”.
(4)
Scan
SET
barcode to complete the variable-binding operation.
(5)
Scan
Ins1Pos
barcode first and then repeat Step (3)-(4) to complete the similar
configurations, if necessary.
(6)
Scan
End
barcode to complete the configuration.
*D16E0*
Ins0Pos
D16E0
(Length: 1 digit / Range: 0-255)
*D17E0*
Ins1Pos
D17E0
(Length: 1 digit / Range: 0-255)
