Configuring Communication
28
MVP-5200i Modero® ViewPoint® Touch Panel with Intercom - Instruction Manual
Modero Setup and System Settings
All AMX Modero panels, including the MVP-5200i, feature on-board Setup pages. Use the options in the Setup pages to access
panel information and make various configuration changes.
Accessing the Setup and Protected Setup Pages
1.
At any time, press down and hold the center button of the navigation wheel for 3-5 seconds. This opens a release notice to
release the button immediately to open the
Setup
page (FIG. 19).
2.
Press the
Protected Setup
button. This opens a keypad for entry of the password to allow access to the
Protected Setup
page
(FIG. 20). Enter the device’s password and press
Done
to proceed.
NOTE:
The default password for the Protected Setup page is 1988, but this may be changed at any time.
For more information on the
Setup
and
Protected Setup
pages, refer to the
Setup Pages
section on page 44 and the
Protected Setup
Pages
section on page 52.
Setting the Panel’s Device Number
In the
Protected Setup
page:
1.
Press the
Device Number
field in the
Device ID
section to open the
Device Number
keypad.
2.
The Master will assign the panel a new Device ID once connected. The default Device number is
0
.
3.
Press
Done
to return to the
Protected Setup
page.
4.
Press
Reboot
to reboot the device and apply the new Device Number.
FIG. 19
Setup page
FIG. 20
Protected Setup page
