Accessories
20
MVP-5200i Modero® ViewPoint® Touch Panel with Intercom - Instruction Manual
Connections and Wiring
The PS3.0 is used to supply power to the MVP-5200i by routing incoming power through the connector pins and charge the
device’s internal battery
Recharging
To recharge the MVP-5200i, slide the device into the Table Charging Station cradle bottom-first and make sure the device is fully
seated in the Charging Station. The charger pins in the bottom of the cradle (FIG. 7) must be in contact with the connector on the
bottom of the MVP-5200i for it to start recharging. The MVP panel will stop recharging automatically once the battery has achieved
its maximum charge.
Cleaning the MVP-TCS-52
You should clean the Table Charging Station after each day’s use to maintain the device’s appearance. Always use a clean cotton
cloth and a spray bottle containing water or a vinegar-based cleaner, as alcohol-based cleaners can damage the device. Do not
directly spray the device: instead, spray the cloth to prevent moisture from collecting on the charger pins. Do NOT use an abrasive
of any type to clean the Table Charging Station, as this may permanently damage or remove the device’s finish.
Wall Charging Station
The optional MVP-WCS-52 Wall Charging Station (
FG5966-1X
) offers the same recharging and connection features as the Table
Charging Station, with the advantage of being placed within accessible locations where the table station is either inconvenient or
impractical (FIG. 8). The Wall Charging Station is available in either white (
FG5966-13
) or black (
FG5966-12
).
The features of the MVP-WCS-52 include:
Full charging of a docked MVP-5200i in approximately 4.5 hours
Touch panel code lock for security
Integrated docking alignment guides for easy docking
Panel eject design with mechanical or electronically controlled capabilities.
FIG. 7
MVP-TCS-52-GW Table Charging Station - Rear
FIG. 8
MVP-WCS-52-GB Wall Charging Station - Front
MVP-TCS-52-GW
Charger pins
Charging Station Cradle
MVP-5200i
MVP-WCS-52
Wall Charging Station
Security Release button
