Appendix B: Wireless Technology
139
MVP-5200i Modero® ViewPoint® Touch Panel with Intercom - Instruction Manual
10. Click the
Add
button to complete the entry and add the new IP Address to the listing of available device IP Addresses. Repeat
this process for all subsequent device IP Addresses.
11. Once the list is complete, click on the
File
drop-down menu and select the
Save
option. This launches a
Save
dialog to assign a
name to the current list of addresses and then save the information as a TXT (text) file to a known location.
NOTE:
This application must be run from a local machine and should not be used from a remote network location.
12. Select the target devices to be uploaded with the selected certificate. These may be:
individually selected by toggling the box next to the
Send
entry (with the Type column).
selected as a group by clicking on the
Check All
radio box located at the top of the device IP Address listing.
13. When ready to send the certificate file to the selected panels, click the
Send
button to initiate the upload.
Once the
Status
field for each entry reads
Done
, the upload was successfully completed.
The AMX Certificate Upload Utility is intended to be used for only one certificate at a time on the touch panel, and has no indicator
that a certification has been loaded onto a touch panel. After a certification has been loaded onto a panel using the Certificate
Upload Utility, you should immediately enter the certificate name (including file extension) into the
Client Certificate
field for the
specified SSID.
Make sure to double-check that the Security Type is correct.
Erasing All Certificates From the Touch Panel
Individual certificates may not be removed from the touch panel. However, all certificates may be removed from the device by using
the
erase cert
telnet command, Certificates may then be re-uploaded, using the AMX Certificate Upload Utility as needed.
