Configuring Communication
49
CV17 17" Modero Coor Video Touch Panels
Configuring Communication
Overview
Communication between the Modero panel and the Master consists of using either
ETHERNET
(
DHCP,
Static IP
) or
ICSNet
. Ethernet communication can be achieved through either a direct connection or through
the use of the optional NXA-WC80211b wireless interface card.
Modero Setup and System Connection
1.
Press the grey Front Setup Access button for
3 seconds
to open the Setup page (FIG. 49).
2.
Press the
Protected Setup
button (located on the lower-left of the panel page) to open the Protected Setup
page and display an on-screen keypad.
3.
Enter
1988
into the Keypad’s password field and press
Done
when finished.
4.
Press the red
Device Number
field to open the Device Number keypad (FIG. 50).
5.
Enter a
Device Number
value for the panel into the Device Number Keypad
.
The default is 10001 and the range is from 1 - 32000.
If you are currently using a Static IP Address, continue with the IP Settings section -
Configuring a Static IP Address over Ethernet
section on page 59
.
Before commencing, verify you are using the latest NetLinx Master firmware.
Verify the NetLinx Studio program being used is Version 2.4 or higher.
FIG. 49
Setup page
Video Adjustment button doesn’t
appear on Non-Video (CA) panels
Battery Base button doesn’t appear
until NXT is connected to a BASE/B
Connection Status
Red
Connection Status icon -
indicates no connection to a Master
Green
Connection Status icon -
indicates connection to a Master
Yellow
Connection Status icon -
indicates an unreliable connection
Clearing Password #5, from the initial Password Setup page, removes the need for
you to enter the default password before accessing the Protected Setup page.
Содержание modero NXD-CV17
