AMX modero NXD-CV17, Руководство по эксплуатации/справочник

Страница: 25 / 168

CV17 Touch Panel Accessories
15 CV17 17" Modero Coor Video Touch Panels
Installation of the Compact Flash Card (Table Top Panel)
These procedures involves removing the outer housing, installing the upgrade card, and then securely
replacing the outer housing back onto the NXT panel.
Step1: Removing the existing NXT Outer Housing
1.
Carefully detach all connectors from the rear of the touch panel.
2.
Gently place the touch panel LCD facedown onto a soft cloth to expose the under-side of the base
(FIG. 16) and prevent scratching of the LCD. Tilt the base forward to provide easy access to the flat-head
and pan-head Housing Screws.
3.
While holding the outer housing and base plate at a 45°, use a grounded Phillips-head screwdriver to
remove the eight Housing Screws.
4.
Rotate the panel back over (while gripping the entire unit with outer housing) and rest the base on a flat
surface.
5.
Tilt the LCD backward to a 45° angle.
6.
In a single motion , carefully pull the outer housing up and then out (away from the LCD panel) to expose
the internal circuit board (FIG. 17).
Do not use Ethernet cables containing mounting boots. These boots can complicate
the removal of the Ethernet connectors from the panel.
FIG. 16 Location of the attachment screws on an NXT panel
Unscrew these
eight Housing
DO NOT
REMOVE
these screws
They secure
the speakers
to the main
board
Screws to remove
the circuit board
housing
Base
Outer Housing
45°