AMX modero NXD-CV17, Руководство по эксплуатации/справочник

Страница: 58 / 168

Panel Calibration
48 CV17 17" Modero Coor Video Touch Panels
Testing your Calibration
1.
Press and hold down the on-screen Calibration button for 6 seconds to enter the Calibration Test page
(FIG. 48).
2.
Press anywhere on this page to confirm the on-screen crosshairs match your touch points.
3.
If the crosshairs do not appear directly below your LCD touch points, press the Back button and
recalibrate the panel using the above steps.
4.
Exit this Calibration Test page by pressing the Back button to return to the Protected Setup page.
FIG. 47 Touch Panel Calibration Screens
FIG. 48 Calibration Test page
The request to touch the crosshairs
is the first on-screen message
Calibration successful is the second
on-screen message that appears
On-screen crosshairs used for
calibration of the touch device
after the calibration process is
completed
On-screen crosshairs is used to
verify a proper calibration of the
panel