Ametek Thermox 2000 ATEX Series, Руководство пользователя

Страница: 77 / 202

Controller / User Interface | 4-9
System Password
By default, the system password is disabled. If you don’t want to enable
a system password, you can skip this section.
This menu option allows you to define a system passwor d. A system
password limits access to certain menu options to authorized personnel
only. You can also use this menu option to disable the password require-
ment.
If you have forgotten the correct password, you can call AMETEK/
Thermox and a service password will be provided so that you can
access the Password option and enter a new system password.
1. Select Passwords from the Setup key menu.
You will be prompted to enter a new system password:
Enter NEW Password
2. Enter a four digit password. To protect the identification of the
password, the numbers you enter are displayed as blocks rather than
as text.
You are then prompted to reenter the password to verify it.
Reenter to Verify
3. Reenter the password. To protect the identification of the password,
the numbers you enter will be displayed as blocks rather than as text.
To later disable or change the system password, you must first
enter the old password to access this menu option, then change or
disable the password (0000 disables the password).
NOTE
NOTE