Ametek Thermox 2000 ATEX Series, Руководство пользователя

Страница: 105 / 202

Calibration | 5-5
Figure 5-2.
Overview of calibrate
key functions.
Calibrate Key Menu Options Functions/Options
Initiate Cal/Initiate Verify Start an automatic, remote, or manual
calibration or verify.
Cal/Verify Data View latest calibration and verify data.
- Cal data
- Verify data
Cal Gas Values Enter calibration gas values.
Inject Cal G as Set pressure and flow of RCU gases without
performing a calibration.
Set Cal Timers - Set control unit time/date.
(applies only for auto cal
operations with RCU,
- Enable or disable auto cal cycles.
except for setting time
and date)
- Set cal gas times for auto cal/verify
operations.
- Define recovery durations after a cal/verify.
Set K Factor Enter Value
Sensitivity View the Sensitivity (Slope) determined during
calibration for the combustibles detector
in mV/1000 ppm