Amazone UX 4201 Super, Руководство по эксплуатации

Страница: 169 / 256

Use of the implement
UX01 Super CP Plus BAG0229.2 11.21 169
11.3 Spraying operation
Special instructions for spraying operation
•
Test the field sprayer by metering
ο before the start of the season.
ο in the case of deviations between the actual indicated spray
pressure and the spray pressure prescribed in the spray
table.
•
Before starting spraying, determine the exact application rate
required, referring to the instructions of the crop protection agent
manufacturer.
→ Before you start spraying, enter the required application rate
(target rate) on control terminal.
• During spraying operation, precisely adhere to the required
application rate [l/ha]
ο
in order to achieve the best possible results from your crop
protection measure.
ο
to avoid unnecessary pollution of the environment.
•
Select the required nozzle type from the spray table before
spraying starts, taking account of
ο the intended forward speed,
ο the required application rate and
ο the required atomisation characteristic (fine, medium or
coarse-dropped) of the crop protection agent used for the
crop protection measure.
Refer to the section "Spray tables for flat-fan, anti-drift,
injector and airmix nozzles", Seite 244.
•
Select the required nozzle size from the spray table before
spraying starts, taking account of
ο
the intended forward speed,
ο the required application rate and
ο the target spray pressure.
Refer to the section "Spray tables for flat-fan, anti-drift,
injector and airmix nozzles", Seite 244.
• Select a low forward speed and a low spray pressure to prevent
drift losses!
Refer to the section "Spray tables for flat-fan, anti-drift, injector
and airmix nozzles", Seite 244.
•
At wind speeds of 3 m/s, take additional drift reduction measures
(refer to the section "Measures for drift reduction", page 172 )!