Road transport
UX01 Super CP Plus BAG0229.2 11.21
149
10
Road transport
•
During transportation, follow the instructions given in the section
"Safety instructions for the operator", page 32.
•
Before moving off, check:
ο
the correct connection of the supply lines.
ο
the lighting system for damage, proper operation and
cleanliness,
ο
the braking and hydraulic systems for obvious defects.
ο
that the parking brake is completely released.
ο
the function of the brake system.
WARNING
Risk of contusions, cutting, catching, drawing in and knocks
when making interventions in the implement through
unintentional implement movements.
•
On folding implements, check that the transport locks are locked
correctly.
•
Secure the implement against unintentional movements before
starting transportation.
WARNING
Risk of crushing, cutting, being caught and/or drawn in, or
impact from tipping and insufficient stability.
•
Drive in such a way that you always have full control over the
tractor with the attached machine.
In so doing, take your personal abilities into account, as well as
the road, traffic, visibility and weather conditions, the driving
characteristics of the tractor and the connected or coupled
implement.
WARNING
Danger of breaking during operation, insufficient stability and
insufficient tractor steering and braking power on improper use
of the tractor!
These risks pose serious injuries or death.
Comply with the maximum load of the connected implement and the
approved axle and drawbar loads of the tractor. If necessary, drive
only with a partially filled hopper.
Содержание UX 4201 Super
