Amazone UX 4201 Super, Руководство по эксплуатации

Страница: 67 / 256

Layout and function of the basic implement
UX01 Super CP Plus BAG0229.2 11.21 67
5.5.1 Coupling the hydraulic hose lines
WARNING
Risk of being crushed, cut, caught, drawn in or struck due to
faulty hydraulic functions when the hydraulic hose lines are
connected incorrectly!
When coupling the hydraulic hose lines, observe the coloured
markings on the hydraulic connectors.
•
Check the compatibility of the hydraulic fluids before connecting
the implement to the hydraulic system of the tractor.
Do not mix any mineral oils with biological oils.
• Observe the maximum approved hydraulic fluid pressure of
210 bar.
•
Only couple clean hydraulic connectors.
• Push the hydraulic connector(s) into the hydraulic sleeves until
you feel them lock.
•
Check the coupling points of the hydraulic hose lines for a
correct, tight seat.
1. Swivel the actuation lever on the control valve on the tractor to
float position (neutral position).
2. Clean the hydraulic connectors of the hydraulic hose lines
before you couple the hydraulic hose lines to the tractor.
3. Connect the hydraulic hose line(s) to the tractor control unit(s).
5.5.2 Uncoupling the hydraulic hose lines
Implements with LS or accumulator charging circuit:
• Only uncouple the hydraulic hoses when the tractor is switched
off.
•
Observe the sequence for uncoupling.
1. Hydraulic hose P
2. Hydraulic hose LS
3. Hydraulic hose T
1. Swivel the actuation lever on the tractor control unit on the
tractor to float position (neutral position).
2. Release the hydraulic connectors from the hydraulic sockets.
3. Protect the hydraulic connector and hydraulic connector socket
from soiling using the dust protection caps.
4. Place the hydraulic hose lines in the hose cabinet.