Amazone UX 4201 Super, Руководство по эксплуатации

Страница: 209 / 256

Cleaning, maintenance and repairs
UX01 Super CP Plus BAG0229.2 11.21 209
14.7 Tyres / wheels
•
Required tightening torque for wheel nuts or bolts:
510 Nm
To assemble the wheels, use:
(1) conical rings in front of the wheel nuts.
(2) only rims with a fitting countersink for the conical ring.
•
Regularly check
ο that wheel nuts are firmly seated.
ο the tyre inflation pressure.
•
Only use the tyres and rims that we have specified.
• Repair work on tyres must only be carried out by specialists
using suitable assembly tools.
•
Tyre fitting requires sufficient skills and proper assembly tools.
• Use the jack only at the marked jacking points!
14.7.1 Tyre inflation pressure
Inflate the tyres with the indicated nominal pressure.
•
The value for the nominal pressure can be read on the rim.
• The value for the nominal pressure can be obtained from the tyre
manufacturer.
• Check the tyre pressure regularly when the tyres are cold, i.e.
before starting to drive, see page 53.
•
The difference in pressure between the tyres on one axle must
be no greater than 0.1 bar.
• Tyre pressure can be raised by up to 1 bar after a fast run or in
warm weather. Tyre pressure should never be reduced in this
case, as it is then too low when the tyres cool down.