Amazone UX 4201 Super, Руководство по эксплуатации

Страница: 66 / 256

Layout and function of the basic implement
66 UX01 Super CP Plus BAG0229.2 11.21
Oil return flow
Maximum permissible pressure in the oil return: 5 bar
Therefore, do not connect the oil return to the tractor control unit, but
rather to a pressure-free oil return with a large plug coupling.
WARNING
Only use DN16 lines for the oil return and select short return
paths.
Only apply pressure to the hydraulic system when the free return
line is coupled correctly.
Install the supplied coupling sleeve to the pressure-free oil return.
Oil volume flow
Depending on the implement equipment (equipment a, b, c), the im-
plement requires a specific oil volume flow that must be provided by
the tractor.
Select the tractor such that it provides the required oil volume flow at
operating point X on the field and also on the headlands with a mode-
rate engine speed. You must also consider the tractor's own require-
ments.
An oil shortage impairs the functioning of the implement and can
cause damage to the implement.
Load sensing operation
For load sensing operation, move the switch tap on the hydraulic
block to the corresponding position