General safety instructions
30
UX01 Super CP Plus BAG0229.2 11.21
2.16
Safety information for users
WARNING
Risk of crushing, cutting, being trapped or drawn in, or impact
through inadequate roadworthiness and operational safety.
Before starting up the implement and the tractor, always check their
traffic and operational safety.
2.16.1 General safety instructions and accident prevention instructions
•
In addition to these instructions, also comply with the generally
valid national and safety and accident prevention regulations!
•
The warning symbols attached on the implement provide
important instructions for safe operation of the machine.
Compliance with these instructions is essential for your safety!
•
Before moving off and starting up the implement, check the
immediate area of the implement (children). Ensure that you can
see clearly.
•
It is forbidden to ride on the implement or use it as a means of
transport!
•
Drive in such a way that you always have full control over the tractor
with the attached implement.
In so doing, take your personal abilities into account, as well as
the road, traffic, visibility and weather conditions, the driving
characteristics of the tractor and the connected or coupled
implement.
Coupling and uncoupling the implement
•
Only connect and transport the implement with tractors suitable
for the task.
•
When coupling implements to the tractor's three-point hydraulic
system, the attachment categories of the tractor and the
implement must always be the same!
•
Connect the implement to the prescribed equipment in
accordance with the specifications.
•
When coupling implements to the front or the rear of the tractor,
the following may not be exceeded:
ο
The permissible total tractor weight
ο
The permissible tractor axle loads
ο
The permissible load capacities of the tractor tyres
•
Secure the tractor and the implement against unintentional
rolling before coupling or uncoupling the implement.
•
It is forbidden for people to stand between the implement to be
coupled and the tractor while the tractor is approaching the
implement.
Any helpers may only act as guides standing next to the
vehicles, and may only move between the vehicles when both
are at a standstill.
•
Before connecting the implement to or disconnecting the implement
from the tractor's three-point hydraulic system, secure the operating
lever of the tractor hydraulic system so that unintentional raising or
lowering is prevented.
Содержание UX 4201 Super
