General safety instructions
16
UX01 Super CP Plus BAG0229.2 11.21
2.6
User training
Only trained and instructed persons should be allowed to work with/on
the implement. The responsibilities of the operating and maintenance
personnel must be clearly defined.
People being trained may only work with/on the implement under the
supervision of an experienced person.
Person
Job
Person
specially trained
for the activity
1)
Instructed
operator
2)
Persons with specialist
training
(specialist workshop)
3)
Loading/Transport
X
X
X
Start-up
--
X
--
Set-up, tool installation
--
--
X
Operation
--
X
--
Maintenance
--
--
X
Troubleshooting and fault
elimination
X
--
X
Disposal
X
--
--
Key:
X..permitted
--
..not permitted
1)
A person who can assume a specific task and who can carry out this
task for an appropriately qualified company.
2)
Instructed persons are those who have been instructed in their
assigned tasks and in the possible risks in the case of improper
behaviour, have been trained if necessary, and have been
informed about the necessary protective equipment and
measures.
3)
Persons with specialised technical training shall be considered
as a specialist. Due to their specialist training and their
knowledge of the appropriate regulations, they can evaluate the
work with which they have been charged and detect possible
dangers.
Comment:
A qualification equivalent to specialist training can be obtained
from several years' experience in the relevant field.
If maintenance and repair work on the implement is additionally
marked "Workshop work", only a specialist workshop may carry out
such work. The personnel of a specialist workshop shall possess the
appropriate knowledge and suitable aids (tools, lifting and support
equipment) for carrying out the maintenance and repair work on the
implement in a way which is both appropriate and safe.
Содержание UX 4201 Super
