manualshive.com logo in svg

Amazone Precea 4500-2, Оригинальное руководство по эксплуатации

Поделиться
Скачать
Amazone Precea 4500-2 Скачать руководство пользователя страница 34

4.5.2 Layout of the warning symbols

Warning symbols indicate danger areas on the
machine and warn against residual dangers. In these
danger areas, there are permanent or unexpected
dangers.

A warning symbol consists of two fields:

Field 

1

 shows the following:

A pictogram depicting the danger area,
surrounded by triangular safety symbol

The order number

Field 

2

 shows a pictogram depicting how to

avoid the danger.

1

2

CMS-I-00000416

4.5.3 Description of the warning symbols

MD 078

Risk of crushing fingers or hands

As long as the tractor engine or implement
motor is running,

stay away from the danger area.

If you have to move marked parts with your
hands,

pay attention to the crushing areas.

Make sure that there is nobody standing in the
danger area.

CMS-I-000074

MD 082

Risk of falling from tread surfaces and platforms

Do not let anybody ride on the implement.

Do not let anybody climb onto the driving
implement.

CMS-I-000081

CMS-T-000141-D.1

CMS-T-00001767-C.1

4 | Product description

Warning symbols 

MG6149-EN-GB | J.1 | 18.10.2022 | © AMAZONE

28

Содержание Precea 4500-2

































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды