6.6.3 Telescoping the implement sections
CAUTION
There are crushing and shear points
between the implement sections and the
implement.
When folding or unfolding the implement
sections,
never reach into the crushing area.
1.
Raise the implement.
2.
Pull on the pull rope
1
.
The hydraulic valve is opened
2
.
3.
Until the implement sections have reached the
end position,
Actuate the pull rope and actuate the "green"
tractor control unit.
When the implement sections have reached their
end position, the conveyor hoses to the fertiliser
coulters may not sag.
4.
If the conveyor hoses are sagging,
fasten the fertiliser hoses.
5.
When the implement sections have reached the
end position,
release the pull rope and move the "green" tractor
control unit to the neutral position.
1
2
CMS-I-00001897
6.6.4 Locking the tractor control units
Depending on the equipment, the tractor control
units are locked mechanically or electrically.
CMS-T-00001909-B.1
CMS-T-00006337-C.1
6 | Preparing the machine
Preparing the machine for road travel
MG6149-EN-GB | J.1 | 18.10.2022 | © AMAZONE
172
