The scrapers enable smooth running of the catch
roller on soils with sticky surface structures.
1.
Lift the implement.
2.
Secure the tractor and implement.
3.
Loosen the nuts
3
.
4.
Adjust the scraper
1
to a distance of 1 mm.
5.
To check the distance,
Rotate the catch roller
2
.
6.
Tighten the nuts.
7.
To check the setting,
drive for 30 m at working speed and then check
the work pattern.
CMS-I-00002727
6.5.14.13 Changing the catch roller
NOTE
The catch roller must be adapted to the respective
operating conditions. The optimum adjustment
can only be determined during field operation.
1.
Raise the implement.
2.
Secure the tractor and implement.
3.
Remove the nut
1
.
4.
Remove the bolt lock
2
.
5.
Remove the bolt.
6.
Remove the catch roller
3
.
7.
To select the catch roller,
see "Determining the setting parameters".
8.
Install the desired catch roller.
9.
To install the suitable furrow former for the
catch roller,
see "Changing the furrow former".
CMS-I-00002876
CMS-T-00003902-D.1
6 | Preparing the machine
Preparing the implement for operation
MG6149-EN-GB | J.1 | 18.10.2022 | © AMAZONE
124
