8.
Depending on the working width
1
and
desired calibration area
2
,
read the number of crank turns from the table.
CMS-I-00002784
9.
To move the calibration flap lever to the
calibration position,
press and hold the lock button
3
and push it
down
4
.
10. Release the lock button
1
.
11. Set the pointer to the setting value 70.
12.
To fill the fertiliser metering unit,
turn the operating tool by 5 turns.
13. Empty the calibration bucket.
14. Turn the operating tool counterclockwise by the
desired number of turns.
NOTE
To prevent overflowing of the calibration bucket,
monitor the fill level.
Stop the calibration and empty the bucket if
necessary.
CMS-I-00002786
6 | Preparing the machine
Preparing the implement for operation
MG6149-EN-GB | J.1 | 18.10.2022 | © AMAZONE
132
