Amazone Precea 4500-2, Оригинальное руководство по эксплуатации

Страница: 152 / 256

To set the row spacing between 55 and 80 cm, the
linch pins
1
must be positioned between the rows.
3. Remove the linch pin between the first and
second coulter.
4. Move the linch pin in the slotted link
2
to the
desired position between the first and second
coulter.
5. Move the linch pin in the slotted link to the desired
position between the second and third coulter.
6. Move the opposite linch pin in the slotted link to
the desired position between the fourth and fifth
coulter.
7. Move the opposite linch pin in the slotted link to
the desired position between the fifth and sixth
coulter.
CMS-I-00003840
8. Remove the linch pin
1
between the third and
fourth coulter.
9. Move the linch pin in the slotted link
2
to the
desired position between the third and fourth
coulter.
10. Remove the opposite linch pin between the third
and fourth coulter.
11. Move the opposite linch pin in the slotted link to
the desired position
3
between the third and
fourth coulter.
CMS-I-00003847
12.
To set the the desired row spacing,
Telescope the implement out.
When the implement sections have reached their
end position, the conveyor hoses to the fertiliser
coulters may not sag.
13.
If the conveyor hoses are sagging,
fasten the fertiliser hoses.
14.
When the implement sections have reached the
end position,
release the pull rope and move the "green" tractor
control unit to the neutral position.
6 | Preparing the machine
Preparing the implement for operation
MG6149-EN-GB | J.1 | 18.10.2022 | © AMAZONE 146