8.
Remove the linch pin
1
between the third and
fourth coulter.
9.
Move the linch pin in the slotted link
2
to the
desired position between the third and fourth
coulter.
10. Remove the opposite linch pin between the third
and fourth coulter.
11. Move the opposite linch pin in the slotted link to
the desired position
3
between the third and
fourth coulter.
CMS-I-00003846
12.
To set the the desired row spacing,
Telescope the implement out.
When the implement sections have reached their
end position, the conveyor hoses to the fertiliser
coulters may not sag.
13.
If the conveyor hoses are sagging,
fasten the fertiliser hoses.
14.
When the implement sections have reached the
end position,
release the pull rope and move the "green" tractor
control unit to the neutral position.
6.5.26 Telescoping 7 rows variably
6.5.26.1 Converting 6 rows to 7 rows
For a row spacing between 60 and 42.9 cm, the
fourth coulter is reactivated.
1.
Disconnect the ISOBUS from the tractor.
2.
telescope the implement in.
3.
Remove the linch pin
1
between the first and
second coulter.
4.
Move the linch pin to the desired position
between the first and second coulter.
5.
Move the opposite linch pin to the desired
position between the sixth and seventh coulter.
CMS-I-00002810
CMS-T-00005409-B.1
CMS-T-00005410-B.1
6 | Preparing the machine
Preparing the implement for operation
MG6149-EN-GB | J.1 | 18.10.2022 | © AMAZONE
148
