1.
Raise the implement.
2.
telescope the implement in.
3.
Remove the linch pin
1
between the first and
second coulter.
4.
Move the linch pin to the desired position
between the first and second coulter.
5.
Move the linch pin to the desired position
between the sixth and seventh coulter.
CMS-I-00002810
6.
Remove the linch pin
1
between the second
and third coulter.
7.
Move the linch pin to the desired position
between the second and third coulter.
8.
Move the opposite linch pin to the desired
position between the fifth and sixth coulter.
CMS-I-00002808
9.
Remove the linch pin
1
between the third and
fourth coulter.
10. Move the linch pin to the desired position
between the third and fourth coulter.
11. Move the opposite linch pin to the desired
position between the fourth and fifth coulter.
CMS-I-00002809
12.
Until the implement sections have reached the
end position,
Actuate the pull rope and actuate the "green"
tractor control unit.
When the implement sections have reached their
end position, the conveyor hoses to the fertiliser
coulters may not sag.
6 | Preparing the machine
Preparing the implement for operation
MG6149-EN-GB | J.1 | 18.10.2022 | © AMAZONE
151
