Amazone Precea 3000-A, Оригинальное руководство по эксплуатации

Страница: 4 / 198

5.6.2 FerTeC Twin coulter 40
5.7 Row spacings 41
5.8 Mounting category 41
5.9 Working speed 41
5.10 Performance characteristics of
the tractor
41
5.11 Noise development data 42
5.12 Drivable slope inclination 42
6 Preparing the machine 43
6.1 Calculating the required tractor
characteristics
43
6.2 Coupling the implement 46
6.2.1 Coupling the supply lines to the
front-mounted hopper
46
6.2.2 Coupling the supply lines to the
front hopper
46
6.2.3 Coupling the hydraulic hose lines 46
6.2.4 Coupling the ISOBUS or control
computer
48
6.2.5 Coupling the power supply 49
6.2.6 Coupling the 3-point mounting frame 49
6.2.7 Coupling the QuickLink 49
6.2.8 Operation without front hopper 53
6.3 Preparing the implement for
operation
53
6.3.1 Adjusting the working position sensor 53
6.3.2 Filling the seed hopper 54
6.3.3 Filling the fertiliser hopper 55
6.3.4 Preparing the micropellet spreader
for operation
58
6.3.5 Determining the setting parameters 63
6.3.6 Adjusting the fan speed via the
hydraulic system
64
6.3.7 Setting up the speed sensor on the
implement
66
6.3.8 Using the multi-placement tester 66
6.3.9 Adjusting the grain singling unit 68
6.3.10 Changing the seed spread rate 77
6.3.11 Adjusting the PreTeC mulch
seeding coulter
81
6.3.12 Creating tramlines 95
6.3.13 Calibrating the electrically driven
fertiliser metering unit
95
6.3.14 Changing the application rate for
liquid fertiliser
99
6.3.15 Adjusting the placement depth on
the coupled fertiliser coulter
101
6.3.16 Adjusting the placement depth on
the leaf spring-guided fertiliser coulter 101
6.3.17 Adjusting the fertiliser application
point
102
6.3.18 Adjusting the filling auger 103
6.3.19 Using the loading board 104
6.3.20 Adjusting the coulter pressure in the
track
105
6.3.21 Installing a seed row 106
6.3.22 Removing seed rows 113
6.4 Preparing the machine for road
travel
122
6.4.1 Folding the implement 122
6.4.2 Increasing the mechanical coulter
pressure
123
6.4.3 Locking the tractor control units 123
7 Using the machine 124
7.1 Using the implement 124
7.2 Turning on the headlands 125
7.3 Checking the placement depth 125
7.4 Using the shifted tramline 125
8 Eliminating faults 127
9 Parking the machine 133
9.1 Emptying the fertiliser hopper 133
9.2 Emptying the seed hopper
through the residual quantity flap
133
9.3 Emptying the seed hopper
through the singling disc
134
9.4 Emptying the fertiliser metering
unit
137
9.5 Emptying the micropellet hopper 138
9.6 Relieving the hole covering rollers 140
9.7 Parking the PreTeC coulter 141
9.8 Disconnecting the supply lines
from the front-mounted hopper
142
TABLE OF CONTENTS
MG6659-EN-GB | F.1 | 25.10.2022 | © AMAZONE II