manualshive.com logo in svg

Amazone Precea 3000-A, Оригинальное руководство по эксплуатации

Поделиться
Скачать
Amazone Precea 3000-A Скачать руководство пользователя страница 128

24. Restart the implement.

25.

To enter the changed working width on the
control terminal,

see "ISOBUS software operating manual" >
"Defining the geometry".

6.4 Preparing the machine for road travel

6.4.1 Folding the implement

1.

Raise the implement.

2.

actuate the "green 2" tractor control unit.

The implement sections are folded.

Coulters are pushed into parking position.

Lighting is unfolded.

3.

When the transport lock 

1

 is engaged,

Release the pull rope and put the tractor control
unit to the neutral position.

CMS-I-00002993

The roller transport lock 

1

 secures the carrying

arms 

2

 of the trailing roller in a folded state.

4.

Before driving off, check that the roller transport
lock is engaged.

or

If the roller transport lock is not engaged,

move the roller outwards until the roller transport
lock engages.

CMS-I-00002932

CMS-T-00003745-C.1

CMS-T-00010892-A.1

6 | Preparing the machine

Preparing the machine for road travel 

MG6659-EN-GB | F.1 | 25.10.2022 | © AMAZONE

122

Содержание Precea 3000-A







































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды