IMPORTANT
Implement damage due to insufficient
hydraulic oil return flow
Only use DN16 lines for the pressureless
hydraulic oil return flow.
Select short return paths.
Connect the pressureless hydraulic return
flow correctly.
Install the supplied coupling sleeve on the
pressureless hydraulic oil return.
1.
Depressurise the hydraulic system between the
tractor and the implement using the tractor control
unit.
2.
Clean the hydraulic plugs.
3.
Couple the hydraulic hose lines
1
to the
hydraulic sockets of the tractor according to the
marking
2
.
The hydraulic plugs lock perceptibly.
4.
Route the hydraulic hose lines with sufficient
freedom of movement and without chafing points.
1
2
CMS-I-00001045
6.2.4 Coupling the ISOBUS or control computer
1.
Plug in the connector of the ISOBUS line
1
or
the control computer line
2
.
2.
Route the ISOBUS line with sufficient freedom of
movement and without chafing or pinching points.
1
2
CMS-I-00006891
CMS-T-00003611-E.1
6 | Preparing the machine
Coupling the implement
MG6659-EN-GB | F.1 | 25.10.2022 | © AMAZONE
48
