6.3.21 Installing a seed row
6.3.21.1 Installing the PreTeC mulch seeding coulter
1.
To move the installed coulters to the desired
position,
Loosen the bolts
1
.
2.
Push the coulters into the desired position.
3.
For telescopic coulters
Tighten the bolts to 160 Nm minus 180°,
or
For non-telescopic coulters
Tighten the bolts to 200 Nm.
CMS-I-00002039
Installing the coulters with a crane is described in the
following.
4.
To make the coulter tip slightly towards the
front for installation,
select a longer front load handling device at the
front than at the rear.
5.
Fasten the load handling device on the coulter top
link
2
.
6.
Fasten 2 load handling devices on the coulter
body
1
.
CMS-I-00004137
7.
Guide the tilted coulter
1
along the frame
2
.
8.
Lower the coulter.
CMS-I-00004136
CMS-T-00005483-D.1
CMS-T-00005491-C.1
6 | Preparing the machine
Preparing the implement for operation
MG6659-EN-GB | F.1 | 25.10.2022 | © AMAZONE
106
