manualshive.com logo in svg

Amazone Precea 3000-A, Оригинальное руководство по эксплуатации

Поделиться
Скачать
Amazone Precea 3000-A Скачать руководство пользователя страница 70

NOTE

For sunflower seeds larger than 15 ml, use opto-
sensor, feed channel and furrow former with a
diameter of 20 ml.

NOTE

For soya, the size can fluctuate depending on the
seed. The actual spread rate can deviate strongly
from the target rate. Check the grain placement
after driving a short distance.

When using the 120/4 ml discs, there can
be deviations in the distribution along the row
depending on the seed, target rate and forward
speed.

NOTE

Operating conditions such as the grain shape,
dressing or the addition of talcum affect the
correct selection of the singling discs. The
selection of the singling discs width must be
adapted to the respective operating conditions
and can only be determined during field
operation.

The sliding shutter position and fan pressures are
reference values. Check the grain placement after
driving a short distance.

1.

The setting parameters can be found in the table.

2.

To adjust the grain singling,

see "Adjusting the grain singling unit".

3.

To adjust the PreTeC coulter,

see "Adjusting the PreTeC coulter".

6.3.6 Adjusting the fan speed via the hydraulic system

REQUIREMENTS

The seed hoppers are filled

The implement is unfolded

The fan is switched on

The singling discs are filled with seed grains

The fan speed changes until the hydraulic fluid has
reached its operating temperature.

CMS-T-00001948-G.1

6 | Preparing the machine

Preparing the implement for operation 

MG6659-EN-GB | F.1 | 25.10.2022 | © AMAZONE

64

Содержание Precea 3000-A







































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды