4.
Move the setting lever to the desired position.
5.
Lock the setting lever in the grid.
6.
To check the setting,
drive for 30 m at working speed and then check
the work pattern.
7.
If the seed furrow is not closed at the set press
roller pressure,
you must also adjust the press roller pitch.
1
-
+
CMS-I-00001927
8.
Move the setting lever to the desired position.
9.
Lock the setting lever in the grid.
10.
To check the setting,
drive for 30 m at working speed and then check
the work pattern.
11.
If the seed furrow is not closed at the set press
roller pitch,
you must also adjust the press roller distance.
-
+
1
CMS-I-00001929
Operating conditions
Press roller distance
Heavy soils
Reduce the press roller
distance:
-
Light soils
Increase the press roller
distance:
+
NOTE
To adjust the pressure point of the press rollers
at the centre of the furrow, there are setting
bushings at different distances.
12. Loosen the inner lock nut and remove it.
13. Remove the bolt
1
with the press roller.
14. Move the press roller
3
with the setting bushing
2
to the desired position.
15. Install the press roller with bolts.
16. Tighten the lock nut.
1
-
+
2
3
4
175 Nm
CMS-I-00001928
6 | Preparing the machine
Preparing the implement for operation
MG6659-EN-GB | F.1 | 25.10.2022 | © AMAZONE
90
