10.1.4 Adjusting the cutting disc drive on the PreTeC mulch seeding coulter
INTERVAL
Every 50 operating hours
or
Every 3 months
1.
Remove the bolt
2
.
2.
Remove the depth control wheel
1
.
The depth control wheel drives the cutting disc
through rotation.
3.
To ensure that the depth control wheel
1
slightly touches the cutting disc
6
,
adjust the distance of the depth control wheel
with the spacer discs
3
and
4
.
4.
Spacer discs that are not needed are fastened to
the depth control wheel arm
5
.
Fasten the discs on the opposite side using the
bolt.
2
3
4
5
1
6
175 Nm
CMS-I-00002016
10.1.5 Checking and replacing the closer discs on the PreTeC mulch seeding coulter
INTERVAL
Every 100 operating hours
or
Every 3 months
1.
Determine the diameter of the closer discs.
2.
If the diameter of the closer discs is smaller than
180 mm,
replace the closer discs in pairs.
3.
Loosen and remove the bolts
2
.
4.
Replace worn closer discs
1
with new closer
discs.
5.
Put on and tighten the bolts.
CMS-I-00005666
CMS-T-00002377-G.1
CMS-T-00008304-C.1
10 | Repairing the machine
Maintaining the machine
MG6659-EN-GB | F.1 | 25.10.2022 | © AMAZONE
153
