Amazone GreenDrill GD200-E, Руководство по эксплуатации

Страница: 27 / 106

Product description
GreenDrill BAH0108-0 03.20
27
3.4 EC Declaration of Incorporation
AMAZONE delivers the GreenDrill catch crop
seed drill (1) together with the mounting kit (2) for
the carrying implement. With the delivery of the
carrying implement, the GreenDrill is already
mounted or is then mounted in a specialist
workshop based on the supplied instructions. In
this operating manual in the section "Intended
use" (see page 25), a list of all carrying
implements that are approved for mounting the
GreenDrill are listed. The GreenDrill is marked
for this use with the CE mark and the declaration
of conformity.
If you have purchased the GreenDrill (1) without
an mounting kit, it is considered as an
incomplete implement. Without the mounting kit,
the GreenDrill is marked with a factory plate (see
below) and an EC Declaration of Incorporation is
included. The EC Declaration of Incorporation
states that the product fulfills the relevant basic
safety and health requirements of the EC
Directive as well as the requirements of the EMC
Directive.
The operator is responsible for the proper
mounting of the GreenDrill onto the carrying
implement and for compliance with the standards
and legal requirements.
The operator must ensure that the GreenDrill is operated without danger. This may include a suitable
platform for safe operation of the GreenDrill. The platform must also be easily accessible. This may
require the installation of steps.
Any danger for persons due to the mounting of the GreenDrill on the carrying implement must be ruled
out in all situations.
NOTE
AMAZONE is not liable for damage caused by faulty mounting and
improper operation of the GreenDrill.
The factory plate contains the
(1) Serial number
(2) Type
(3) Factory