Amazone GreenDrill GD200-E, Руководство по эксплуатации

Страница: 83 / 106

GreenDrill control terminal 5.2
GreenDrill BAH0108-0 03.20
83
6.18.4.2 Working position sensor
The working position sensor (1) is required when
the tractor has a 7-pin signal socket that does
not emit a "Working position" signal [see section
"Tractor signal socket (7-pin)", page 82].
The working position sensor (1) can be attached
on the tractor three-point or on the swivelling
running gear of the carrying implement.
The working position sensor transmits the
current position of the GreenDrill to the control
terminal:

The implement is in working position

The implement is in transport position.
Have retroactively purchased special equipment
installed by a specialist workshop based on the
supplied assembly instructions.
The supplied splitter (A) has 3 connections:

Connection (1): Control terminal

Connection (2): 7-pin tractor socket
The connection transmits
the forward speed [km/h].

Connection (3): Working position sensor