Amazone GreenDrill GD200-E, Руководство по эксплуатации

Страница: 28 / 106

Structure and function
28
GreenDrill BAH0108-0 03.20
4
Structure and function
The GreenDrill is used for spreading catch crops and re-seeding grass.
The seed metered by the seed metering wheels is conveyed into the seed hoses (1).
An electrically or hydraulically driven fan (2) produces the air flow to deliver the seed. The GreenDrill
GD500-D is fed by the fan of the carrying implement.
The seed is spread using baffle plates (3) in the operating area of the soil tillage implement tools
working in the soil.
The seed hopper (4) has a volume of 200 or 500 litres, depending on the version. The seed hopper
and metering unit form a sealed pressurised system.
Dosing is carried out by a seeding shaft equipped with seed metering wheels, located in the dosing
housing (5). A 12 V electric drive motor drives the seeding shaft.
Control terminal 5.2 has a selection menu, e.g. for assisting with the calibration procedure, and is
operated from the driver's seat in the tractor cab.
The control terminal 5.2 must be connected to the 7-pin signal socket of the tractor or the radar or
GPS device to display the forward speed, the worked area and the working hours.
The control terminal then shows the forward speed [km/h] and adjusts the seeding shaft speed
according to the changing forward speed. The seed rate [kg/ha] remains unchanged even at varying
forward speeds.
If it is set correctly, speed differences of 50 % are adjusted up and down. Turning at the end of the
field is automatic.