Amazone Cataya 3000 Special, Руководство по эксплуатации

Страница: 135 / 243

Settings
Cataya Special BAH0109-1 02.21
135
9. Adjusting the height of the low level sensor.
9.1 Use the central key (Fig. 158/1) to
open the clamping device of the sieve.
Insert the central key on the hexagon
and move upwards parallel to the rear
wall of the seed housing.
Fig. 158
9.2 Adjust the height of the low level sen-
sor (Fig. 159/2) according to the de-
sired residual seed quantity.
9.3 Tighten the wing nuts (Fig. 159/1).
10. Close the charging sieve.
Fig. 159
With small fill quantities, e.g. when seeding rapeseed, sometimes the
low level sensor is not covered with seed. The control terminal reports
"Low fill level" even though the seed hopper is sufficiently filled.
Switch off the warning messages by pushing the low level sensor in
front of the agitator shaft and tightening the wing nuts. The control
terminal will no longer issue any warning messages.