Alpha-InnoTec HT 12Split Скачать руководство пользователя страница 56

Страница: 56 / 80

HT 6Split

HT 12Split

Chapter 9 |

Control

IMPORTANT

Menu 5.3.21 is deactivated in the factory settings. For
this menu function to be active, it is necessary to install

accessory and activate it in the Accessories menu 5.2.4.

IMPORTANT

Menu 5.3.16 is deactivated in the factory settings. For
this menu function to be active, it is necessary to install

accessory and activate it in the Accessories menu 5.2.4

IMPORTANT

Menu 5.3.14 is deactivated in the factory settings. For
this menu function to be active, it is necessary to install

accessory and activate it in the Accessories menu 5.2.4.

IMPORTANT

Menu 5.3.11 is deactivated in the factory settings. For
this menu function to be active, it is necessary to install

accessory Modbus Split and activate it in the Accessories

menu 5.2.4.

IMPORTANT

The contact to the AUX input must be a potential-free

contact (normally open-normally closed).

IMPORTANT

Menu 5.3.12 is deactivated in the factory settings. For
this menu function to be active, it is necessary to in-

stall accessory and activate it in the Accessories menu

5.2.4.

IMPORTANT

After resetting, the start guide will be displayed the

next time the control module is started up, and the set-
tings will be lost.

Menu 5.3.11 - Modbus

For a detailed description of how to program accessories,
refer to the instructions of the individual accessories.

Menu 5.3.12 - Exhaust/supply air module

Menu 5.3.14 - F135

For a detailed description of how to program accessories,
refer to the instructions of the individual accessories.

Menu 5.3.21 - flow sensor / energy meter

For a detailed description of how to program accessories,
refer to the instructions of the individual accessories.

Menu 5.3.16 - Humidity sensor

Menu 5.5 - Factory setting service

All settings can be reset (including settings available

to the user) to factory default values here.

Menu 5.6 - Forced control

You can force control the different components in the

control module and any connected accessory in this
menu.

This menu is used for testing individual components of the
HT 6Split / HT 12Split .

Menu 5.4 - Selectable in/outputs

In this menu you can select which input on the input

board (AA3) the external contact function (

page 73

)

can be connected to.

Available inputs on the terminal blocks AUX1-3

(AA3-X6:9-14). The AUX inputs are freely program

mable and allow for the introduction of additional
functions using external contacts.

Input AA3-X7 can be programmed according to your

needs.

Possible configurations AA3-X7:

•

Not used,

•

Holiday,

•

Away mode,

•

Alarm output,

•

Hot water recirculation,

•

Ext heat. med. pump

Factory setting:

Содержание HT 12Split

















































































Результаты поиска

Содержание HT 12Split

Отзывы:

Похожие инструкции для HT 12Split

Бренды по названию

Популярные бренды

Alpha-InnoTec HT 12Split, Инструкция по установке и эксплуатации

Результаты поиска

Содержание HT 12Split

Отзывы:

Похожие инструкции для HT 12Split

Бренды по названию

Популярные бренды