Alpha-InnoTec HT 12Split, Инструкция по установке и эксплуатации

Страница: 10 / 80

10
HT 6Split
HT 12Split
XL10
XL1
XL2
-EB101
-BT1
BA-SVM 10-200
-GP11
P
XL18 XL19
HS1 -BP4
-BT15
-BT12
-BT3
-GP12
-BT25
-QN12
-BT63
-BT71
-QN10
-BT7
-BT6
P
EQ-BT25/BT64
The HT 6Split / HT 12Split indoor unit is equipped
with a coil water heater, diaphragm expansion vessel,
safety group, electric heating module (heater), isola-
tion valves, plate heat exchanger, metering instru-
ments, and an electronic circulation pump. Together
with the outdoor unit of air heat pump LSplit, forms a
complete heating system.
The LSplit outdoor unit provides heat for heating the
domestic hot water and supplying the heating system
while using free energy in the outdoor air, efficiently
operating within the range of low temperatures up to
-20°C.
Installation diagram
The connection of the outdoor unit and indoor unit HT
6Split / HT 12Split, with a system of pipes filled with
a cooling medium secures the connection against
freezing in the event of any power outages. The con-
trol of system operation is the function of controller
module.
Symbol Description
Cut-off valve
Non-return valve
Three-way valve
Safety valve
Temperature sensor
Diaphragm expansion
vessel
Manometer
Vent
Circulation pump
Electric module
Symbol Description
Particulate filter
Compressor
Heat exchanger
Cooling
Central heating
systems
Domestic hot water
Relief valve
Additional heat source
Basic connection diagram
Chapter 4 |
Pipe connections
HT 6Split
HT 12Split
The control mechanism of HT 6Split / HT 12Split al-
lows for two cooling operation systems to be used:
• 2-pipe cooling system,
• 4-pipe cooling system.