Alpha-InnoTec HT 12Split, Инструкция по установке и эксплуатации, Страница: 48 / 80

48
HT 6Split
HT 12Split
Chapter 9 |
Control
Menu 2.9 - Advanced
Menu 2.9.1 - Periodic increase
The advanced menu is intended for advanced users.
To prevent bacterial growth in the hot water tank, the
compressor and the immersion heater can increase
the hot water temperature for a short time at regular
intervals. For more information select "?".
The frequency of temperature increases can be se-
lected here. The length of time can be set between
1 and 90 days. The factory setting is 14 days. Tick/
untick “on” to start/stop the function.
Factory settings:
Activated: activated
Period: 14 days
Start time: 00:00
Menu 3 - Info
Menu 3.1 - Service info
Menu 3.2 - Compressor info
Menu 3.3 - Add. heat info
The information menu is used for reading informa-
tion. Status information for the relevant menu can be
found on the display to the right of the menus.
Information about the heat pump’s current operating sta-
tus (e.g. current temperatures etc.) can be obtained here.
This menu cannot be edited. The information is on sev-
eral pages. Turn the control knob to scroll between the
pages. A QR code appears on one side. This QR code
indicates serial number, product name and limited oper-
ating data.
Information about the compressor’s operating status
and statistics can be obtained here. This menu can-
not be edited. The information is on several pages.
Turn the control knob to scroll between the pages.
For more information select "?".
Information about the additional heat settings, operating
status and statistics can be obtained here. This menu
cannot be edited. The information is on several pages.
Turn the control knob to scroll between the pages. For
more information select "?".