iLive Reference Guide – Firmware
Part 2 - 9
AP6526-2 iss.4
Clock
Displays the TouchScreen CPU real time clock. The time may be changed
from the
UTILITY / Configuration / Date Time
page.
Current User
The current User name is displayed here. To log in as a different
user go to the
UTILITY / Change User
page. Up to 8 User Profiles may be set by the
Administrator using the
UTILITY / Configuration / Edit User Profiles
page.
Last Show Recalled
Displays the name of the last Show memory recalled. To
recall a different show go to the
UTILITY / Configuration / Show Manager
page.
Lower Status bar
Current Mix
The left of this toolbar always displays the active fader strip mix type
and number as currently selected using the
MIX
keys. For example ‘
Input 9
’ indicates
that the input channel 9
MIX
key is selected and the master strips display the
assignments and sends from that input. ‘
Mono Aux 1
’ indicates that the mono Aux 1
master strip
MIX
key is selected and the inputs strips display the assignments and
levels to that master. Deselecting a
MIX
key returns the strips to the Main mix if one is
configured. This is the recommended default mode for FOH mixing. ‘
Main
’ displays on
the toolbar to indicate you are in the default mix. If there is no main mix, for example a
monitor mix configuration, then the left of the toolbar remains blank when the
MIX
key is
deselected.
Current and Next Scene
The right of the lower toolbar displays the name and
number of the last Scene memory recalled during the session, and the name and
number of the Scene currently highlighted in the SCENES page. The highlighted Scene
is the next that would be recalled when you press the GO key to the right of the faders,
for example for use as scene recall during a theatre production. To enable these keys
go to the TouchScreen
SURFACE SETUP / Preferences
page.
Note:
To avoid accidentally overwriting your current settings make sure the
Surface Scene Keys are disabled if you are not using them
.
AFL/PFL active for inputs and outputs
indicates that an Input or Output
(Mix) PAFL is active. If both are active then the Input PAFL overrides the Output PAFL
selection.
Status information
The lower toolbar also displays useful information while
operating the console. For example, it shows you what parameters are held in the copy
buffer while the COPY or PASTE keys are held down.
USB symbol
Displays when the system recognises a USB memory key plugged
into one of its USB ports.
Yellow warning triangle
Displays when a system error has been detected.
Return to the Status page for further information.
