Akai MPC Touch, Руководство пользователя

Страница: 95 / 322

95
Masters
You can load up to four insert effects to each master output (a stereo pair of channels: Outputs 1 / 2 , Outputs 3 / 4 ,
etc.). You can do this in Main Mode or the Channel Mixer.
To load a master insert effect in Main Mode :
1. If the channel strip is not already shown, tap the small
eye icon
below the
Project
field to show it.
2. Tap the crown icon at the top of the channel strip. The channel strip will now show settings for the current
master output.
3. Use the
Outputs
field at the top of the channel strip to select the desired master output (
Outputs 1
/
2
,
Outputs
3
/
4
, etc.).
4. Tap the area under Inserts , and then use the screen that appears to load or edit effects.
To load a master insert effect in the Channel Mixer
:
1. Use the Mixer field in the upper-left corner to select Masters .
2. In the touchscreen, tap the pad that corresponds to the desired master output ( Outputs 1 / 2 , Outputs 3 / 4 , etc.).
Alternatively, double-tap the Outputs field below the Mixer field.
3. Tap the area under Inserts , and then use the screen that appears to load or edit effects. Alternatively, tap the Insert
tab at the bottom of the screen (tap it multiple times to select a different insert slot), and then double-tap the desired
pad
on the screen. You could also use the
data dial
or
–
/
+
buttons to select an effect immediately.