![Akai MPC Touch Скачать руководство пользователя страница 157](http://html1.mh-extra.com/html/akai/mpc-touch/mpc-touch_user-manual_2884277157.webp)
157
Trim Mode
We recommend using Trim Mode to crop the start and/or ends from a sample.
To enter Trim Mode
, tap the
Trim
/
Chop
button in the lower-left corner so it says
Trim
.
Use the
Start
and
End
fields to set the position of the start point and end point of the sample (respectively).
Alternatively, tap and drag the start (
S
) or end (
E
) marker left or right, or use the
first
column of
Q-Link knobs
(
Start
X1__
) to adjust the start point or the
second
column of
Q-Link knobs
(
End X1__
) to adjust the end point.
Trim Mode includes a loop function. When on, the region of the sample between the loop point and end point will repeat.
This is useful when trying to find an ideal spot to begin the sample. The loop cannot be earlier than the start point.
To adjust the loop point
, do any of the following:
•
Use the
Loop
field.
•
Tap and drag the start (
S
) marker (if
Loop Lock
is on) or the
loop
marker (if
Loop Lock
is off).
•
Use the
first
column of
Q-Link knobs
(
Start X1__
; if
Loop Lock
is on) or the
third
column of
Q-Link knobs
(
Loop X1__
; if
Loop Lock
is off). The top-most
Q-Link knobs
(
13
and
15
) provide coarse adjustment. The
bottom-most
Q-Link knobs
(
1
and
3
) provide fine adjustment.
To turn Loop Lock on or off
, tap the
Loop Lock
button. When on, the loop point is the same as the start point.
When off, the loop point is independent from the start point and indicated by a separate loop marker.
To turn the loop function on or off
, tap the
Loop
button to cycle between the four modes:
Off
: The sample will not loop.
Forward
: When the loop reaches its end point, it will start playing again from the loop point.
Reverse
: When the loop reaches its end point, it will play in reverse. When it reaches the loop point again, it will
return to the end point and continue playing in reverse.
Alternating
: When the loop reaches its end point, it will play in reverse. When it reaches the loop point again, it
will start playing forward again from the loop point.
To switch between Forward and off
, press and hold
Shift
, and then tap
Loop
at the bottom of the screen.
Содержание MPC Touch
Страница 1: ...User Guide English Manual Version 2 0 8...
Страница 322: ......