149
To adjust the velocities of the steps
, do either of the following:
•
Tap anywhere on the
velocity bar
of a step. The top of the velocity bar will jump to that point.
•
Use the
slider
on the right edge of the screen to increase or decrease the velocities of all steps.
Use the
Nudge <
and
Nudge >
arrows to shift each step left or right (respectively) one step. This is useful for
experimenting with different rhythmic permutations.
Use the
slider
on the right edge of the screen to increase or decrease the velocities of all steps.
Use the
Flip Steps
button to switch which steps have notes entered and which do not have notes.
Steps that previously had no notes will now have notes at full velocity (
127
). Steps that previously had
notes will now be empty.
Tap
Presets
to show or hide the preset sequence controls. These controls let you manipulate and
transform the velocities of the current bar in the sequence.
The
first
button will apply ascending or descending velocities to the steps. Each time you tap it, it will
cycle through these options:
•
The velocities will ascend to a single peak at the end of the bar.
•
The velocities will ascend to two peaks—one after each half of the bar.
•
The velocities will ascend to four peaks—one after each quarter of the bar.
•
The velocities will descend from a single peak at the start of the bar.
•
The velocities will descend from two peaks—one after each half of the bar.
•
The velocities will descend from four peaks—one at the start each quarter of the bar.
The
second
button will set the velocities of the steps to be at the maximum value (
127
) or minimum
values (
1
), depending on their position in the bar. Each time you tap it, it will cycle through these options:
•
The velocities of the first half of the bar will be set to
1
. The velocities of the second half will be
set to
127
.
•
The velocities of the first and third quarters of the bar will be set to
1
. The velocities of the
second and fourth quarters will be set to
127
.
•
The velocities of the first, third, fifth, and seventh eighths of the bar will be set to
1
. The
velocities of the second, fourth, sixth, and eighth eighths will be set to
127
.
•
The velocities of the first half of the bar will be set to
127
. The velocities of the second half will
be set to
1
.
•
The velocities of the first and third quarters of the bar will be set to
127
. The velocities of the
second and fourth quarters will be set to
1
.
•
The velocities of the first, third, fifth, and seventh eighths of the bar will be set to
127
. The
velocities of the second, fourth, sixth, and eighth eighths will be set to
1
.
Содержание MPC Touch
Страница 1: ...User Guide English Manual Version 2 0 8...
Страница 322: ......
