Akai MPC Touch, Руководство пользователя

Страница: 38 / 322

38
Recording an Audio Track
We’ve already created some MIDI tracks, so let’s record some actual audio for our next track:
1. Press Main to go back to Main Mode.
2. Tap the
Audio
tab at the bottom of the screen.
Audio 001
will appear in the
Track
field.
3. If the channel strip is not already shown on the left side of the screen, tap Input Config (in the lower part of the
screen) or the small
eye icon
(in the upper-left part of the screen) to show it.
4. Connect a synthesizer or other line-level audio source to the 1/4” (6.35 mm) input / inputs on your MPC
hardware’s rear panel, and set the
Line
/
Phono
selector to
Line
(MPC X, MPC Live).
5. Double-tap the first field ( Input __) and select Input 1 or Input 1,2 (depending on your audio source) as the input
source.
6. If the second field is not set to Out 1 , 2 , double-tap it and select that option as the output.
7. Tap the Monitor button to cycle through its three states until it reads Auto (you will hear incoming audio while
the track is record-enabled only).
8. Turn the 3 / 4 Rec Gain (MPC X) or Rec Vol (MPC Live, MPC Touch) knob to set the input level while playing your
audio source. You should now see the level in the meter. Make sure it does not exceed the maximum level (the
meter should not be “peaking” constantly).
9. If Solo and Mute are on, tap or press them so they are off . Also, tap the automation button so it is off / gray (not
green / Read [ R ] or red / Write [ W ]). Alternatively, press Read / Write (MPC X).
10. Tap the Record Arm button to record-enable the track. Alternatively, press Rec Arm (MPC X).
11. Press
Rec
to record-arm the sequence.
12. To start recording , press Play or Play Start —then play your audio source! You should hear your existing
sequence playing in the background.
To stop recording
, press
Stop
.
Record another audio track for your other sequence: Select the other sequence in Main Mode, and create another
audio track (
Audio 002 ) to go with that sequence.