Akai MPC Touch, Руководство пользователя

Страница: 46 / 322

46
Sampling
(
Recording
)
This section describes recording new samples of your own, which you can use in your projects.
Important : To record any audio, you need to connect an audio source to your MPC hardware or to your computer’s
audio interface.
To open the Sampler , press Menu , and then tap Sampler to enter Sampler Mode. Alternatively, press Sampler (MPC X).
1. Connect an audio source to the input/inputs of your MPC hardware.
2. The Input ___ menu in the upper-left corner should be set to Input 1,2 (the inputs of your MPC hardware). If it is
not, then select Input 1,2 .
3. Turn the 3 / 4 Rec Gain (MPC X) or Rec Vol (MPC Live, MPC Touch) knob to set the input level while playing your
audio source. You should now see the level in the meter. Make sure it does not exceed the maximum level (the
meter should not be “peaking” constantly).
4. Tap and drag threshold slider to set the threshold. Alternatively, use the data dial or – / + buttons. Set it to a
fairly low level (e.g., -50 dB ).
5. Tap
Arm
to record-arm the Sampler.
6. Play your audio source. The Sampler will start recording immediately when the input level reaches the threshold
value. Alternatively, tap the round
Record button to manually start recording.
7.
To stop recording
, tap the round
Stop
button. The
Keep or Discard Sample
window will appear.