Akai MPC Touch, Руководство пользователя

Страница: 141 / 322

141
Regardless of which tool is selected, you can do any of the following to edit the selected audio track regions.
Tip
: If you want to hear only the audio track while editing, use the
Solo
button in the
track channel strip
to solo it.
To select a track region , tap the arrow icon to enter Selection Mode and tap a track region. When a track
region is selected, all region parameters will be available to edit.
To undo your last action
, press
Undo
.
To redo the last action you undid , press Shift + Undo / Redo .
To move the selected track region , tap Nudge at the bottom of the screen, and then use the data dial o r – / +
buttons to shift the track region left or right. Alternatively, if the arrow tool or marquee tool are selected, tap
and drag the upper third of the selected track region left or right. By default, you can move a track region only by
quantization values defined by the
Time Correct value (see General Features > Timing Correct ( TC ) to learn
about this).
To move the selected track region without restricting (“snapping”) it to the quantization grid , tap and hold
Don’t Snap in the lower-left corner of the screen, and then use the data dial o r – / + buttons to shift the track
region. In this case, each nudge is equivalent to four ticks.
To adjust the start point or end point of the selected track region
(without changing its position), tap
Edit
Start
at the bottom of the screen, and then use the
data dial o
r
–
/
+
buttons.
To split the track at the current playhead position (creating a track region on either side), tap Split at the
bottom of the screen.
To copy, cut, or paste the selected track region
,
press Copy or press and hold Shift , and then tap
Copy or Cut . Turn the data dial to move the
highlighted track region, and then press the center
cursor or Enter (MPC X) or the data dial (MPC Live,
MPC Touch) to paste it at its current location.
Alternatively, press and hold
Shift , and then tap
Paste (respectively).
To cut, copy, or paste the selected track region ,
press and hold Shift , and then tap Cut , Copy , or
Paste (respectively) at the bottom of the screen.
To duplicate the selected track region , tap Duplicate at the bottom of the screen. The duplicate track region
will appear immediately after the original one.
To create a fade-in or fade out for the selected track region , use the Fade In or Fade Out fields, respectively.
The fades will be shown as a sloped line at the start or end of the track region.
To set the level of the selected track region , use the Level field. The waveform amplitude will change accordingly.